Jacksons Traditional Pointed Top Palisade / Picket Fencing Kit

Traditional pointed Top palisade / Picket fencing is sold in kit form to be built on site. Palisade fencing is also available in Panel Form.

Traditional Pointed Top Palisade / Picket Fencing Kit

• Finished size of pales are 70 x 19mm section, planed with tops pointed.
• Posts for 1 & 1.2m high fences are nominal 100 x 75mm section and have two mortices with tops weathered two way.
• Finished posts for 1.8m fences are 125 x 75mm section and have three mortices with tops weathered two way
• The posts are 0.5m longer than the height of the 1.0m fence or 0.6m longer for the 1.2m or 1.8m fence

When calculating the materials you will need one post every 2.28m section plus one extra for the end of the run.

Rails two per section for 1.0m & 1.2m high and three per section for 1.8m high fence.

Intermediate posts are also suitable for the end of run. Corner posts are for right angled corners only.

Nails : 1kg of 50mm nails required for every 11m of 1.0m & 1.2m fence and for every 7m of 1.8m high fence.  (Stainless Steel Nails recommended

This Traditional Pointed Top Palisade / Picket Fencing Kit is made from superior quality pressure treated timber. All posts, rails and pales are supplied in a planed finish. This really does make this style stand out as a real head turner. It’s high quality finish instantly noticeable once installed